Hydraulic Brake Assemblies

Fits Dexter disc brake calipers on axles with capacities of 6,000 lbs to 8,000 lbs. Semi-metallic construction gives extra strength and conducts excess heat away from the rotor to enhance cooling and prevent warping. This is a set of 4 pads for one...

Replacement Adjuster Screw Assembly on a Dexter, Axle Tek, LCI, Or Lippert 8,000-16,000 lb hydraulic drum brakes This is designed for Right Hand Side (Passenger's Side) Works only on newer Dexter Cast Brakes - After Year 2000 Fits Below Sizes and...

Dexter 5,500-7,000 lb axle replacement caliper kit. This caliper fits both the left or right hand side of your trailer. Caliper is designed with 4 pistons that push from both directions. Made from cast iron construction with a black paint finish. ...

Dexter 6,000, 7,000 or 8,000 lb hydraulic disc brake caliper adapter Adapts the caliper inline down for 3/8" by 24 thread brake line Works on both the LH (Driver's side) & RH (Passenger's) caliper Works with the Dexter K71-693-00, K71-636-00,...

Replacement 5/8" Shoulder Bolts w/ nuts for Dexter 10,000 lb and 12,000 lb Disc Brake Caliper Fits Dexter 089-002-02 Caliper Right or Left Hand Kit includes: 2 Bolts and 2 nuts for 1 caliper Corrosive resistant for longevity Specs: Size:...

Official Dexter 10-12K Hydraulic Disc Brake Caliper HD 10K and 12K hydraulic disc brake caliper for Dexter Trailer Axles. Fits right and left hand side of your trailer. Caliper is complete with pistons – Brake pads are not included. Used on PJ or Load...

Replacement piston stop for Dexter,Axle Tek,IAC,LCI or Lippert hydraulic drum brakes Works on 8,000-15,000 lbs. Capacity axles Works on both Left hand or Right hand brakes. Keeps thy hydraulic drump pistons from overextending Note: 1 required...

Genuine Dexter HD 10K and 12K disc brake pads. For use on all 10K and 12K Dexter Brake Calipers. This kit will service one trailer axle (2 wheels). Semi-Metallic pad material resists heat damage and performs well in cold environments. Kit includes: ...

Replacement Pad Retaining Pin on a Dexter 6,000-8,000 lb hydraulic disc brakes Holds both brake pads firmly in place; a cotter ring #019-019-00 (not included) keeps the pin from falling out Works only on official Dexter disc brake systems Works...

Replacement bleeder screw for Dexter 6,000-8,000 lb Disc Calipers Works on Dexter K17-636-00, K71-693-00 and K71-630-00 Calipers Specs: • Size: M10 x 1.0 • Construction: Steel • Finish: Zinc • Quantity: 1 • Part Numbers: 054-092-00, 54-92,...

Replacement 1/2" Brake drum bolt for Rockwell American 12,000-16,000 lb Drums Interchanges with Drum bolts on 10,000 HD -16,000 lb. Dexter and Lippert axles 8 bolts needed per drum Specs: Size: 1/2"-13 x 1.50" Long Finish: Yellow zinc ...

Dexter 6,000 lb Hydraulic Disc Brake Slip-Over Rotor only • Fits Both Right hand (passenger's) or Left hand (driver's) side of your trailer • Is vented to improve heat dissipation • Mounts to Idler hub with 6-mounting studs and nuts (not included) •...