This trailer idler / hub fits a 2,000 - 2,200 lb Dexter axle.
• Comes with 1/2" studs and races pressed in.
• Fits both BT8 1" spindle or BTR 1-1/16" spindle.
• Bolt Pattern: 5 on 4.5" (most common).
• Stud size: 1/2".
• Capacity: 1,100 lbs.
• Hub Flange Diameter: 5-1/2".
• If you want this Idler with bearings, grease seal, grease cap, lug nuts etc. consider part number #G8-259-5UC1-EZ.
• On 13" - 15" tires, you can use a 6-1/2" hub flange (part #8-258-5).
If you are running a BTR 1-1/16" axle spindle:
• Both inner bearing & outer bearing: part #L44649.
• Races will remain the same.
• Single lip grease seal for none EZ-lube: #10-9, 1.987" outside diameter, 1.5" inside diameter.
• Double lip grease seal for EZ-lube: #10-10, 1.987" outside diameter, 1.5" inside diameter.
• EZ-lube grease cap: #21-41-1 (1.986").
• None EZ-lube grease cap: #46749 (1.986").
• EZ-lube rubber grease cap plug: #85-1.
If you are running a BT8 1" axle spindle:
• Both inner bearing & outer bearing: part #L44643.
• Races will remain the same.
• Single lip grease seal for none EZ-lube: #34823, 1.983" outside diameter, 1.249" inside diameter.
• Double lip grease seal for EZ-lube: #12192TB, 1.983" outside diameter, 1.249" inside diameter.
• EZ-lube grease cap: #21-41-1 (1.986").
• None EZ-lube grease cap: #46749 (1.986").
• EZ-lube rubber grease cap plug: #85-1.
