9-10K Electric Brake Assembly - Left Hand

• Complete left hand (driver side) electric brake assembly for 9,000-10,000 lb. General Duty axles.
• Works on both Dexter and Lippert Brand axles.
• Simply bolts on to the axle flange with 7 bolts (not included) and hooks up the 2 electrical wires.
• Forward self-adjusting brakes – requires no manual adjustment.
• Works with most standard hub/drum assemblies including Dexter and Lippert (LCI).
• Brakes are QAI & CSA certified and pads are fully bonded (no rivets) for long life and reliability.
• E-coated backing plates and zinc plated components resist rust and corrosion.
• Rear plastic adjuster plugs are included to cover access holes.

Main Specs:

• Brake Size: 12-1/4" Diameter x 3-3/8" wide
• Mounting Position: Left Hand (Driver's side)
• Adjust Type: Forward Self-Adjusting
• Mounting Flange Type: 7 bolt
• Manufacturer: Axle Teknology LLC.
• Part Number: B1210E-11
• Dexter Crossover Number: K23-448-00 or 023-448-00
• Lippert Crossover Number: 181935
• Warranty: Limited 1 Year

Axle Technology Quality: Self-Adjusting Brakes Advantage: Standard electric brakes require the user to manually adjust the brake shoes over time. Adjustment is required to provide consistent and efficient braking performance. Failure to complete this task results in weak brakes and potential emergency brake failure. Self-adjusting brakes automatically maintain proper alignment while driving forward, saving time and providing consistent, safer braking. QAI Testing and CSA Certification: These brake assemblies meet and exceed the requirements for the Canadian Standards Association (CSA). CSA certification requires a brake to stop a regulated load within a set distance and be built to industry standards. Additionally, these brakes have been tested by QAI for performance in a complete automotive setup under real-world conditions, ensuring safety and quality. Automotive-Grade Friction Material: Axle Technology brings automotive-grade friction material to the trailer brake market, providing improved stopping power and longevity. The friction material is fully bonded to the brake shoe and custom-molded for a perfect fit, reducing the chance of cracking or crumbling. Tapered edges protect against mechanical lockup that can occur when brake shoes are excessively worn or broken. The friction material is SAE-N certified, meaning it is environmentally safe and complies with California and Washington regulations. This material not only provides high-performance braking that stands the test of time, but is also environmentally friendly and safe for use in both the United States and Canada.